Lighting body: madeof synthetic material, completely independent. Composed of 8 LEDs, powered by a LiPo battery.
The charge through USB cable and the polycarbonate coupling to the flexible tube are in one of the short sides.
The cover outside is in transparent polycarbonate and it guarantees resistance and brightness. The matt zone, collocated upside the cover, indicates the area that you should touch to turn the lamp on and off.
Flexible tube: it has a steel spring inside, which allows it to move. Made of brass.
Support: you can choose among 3 different models, depending on the need.
The base is made of Zamak and it could have different finishing, galvanic or varnished.
CHARGE INDEX: Red Led = charging / Green Led = charge complete / Orange Led = there is a malfunctioning.
INSTALLATION: Charge completely before installing.
HOW TO RECHARGE: Insert the Micro USB cable into the handle/hanger and connect it with a USB power source (PC, power source 220 V, charger). If the battery is completely out of power, it will take about 3 hours to recharge. We suggest leaving the switch OFF during the charge.
PUT THE SWITCH ON TO USE THE PRODUCT
HOW IT WORKS: The light turns on when you touch the upper part. The lighting body can be easily removed and put elsewhere or used as portable light.
CONTENT OF THE BOX:
-Table model: lighting body, flexible tube, base, mini USB cable, charger, screw, socket head screw.
-Model with clip: lighting body, flexible tube, clip, mini USB cable, charger.
-Applique/Pin cap model: lighting body, flexible tube, applique, pin cap, mini USB cable, screw, socket head screw, wall fastening kit, charger.
Made in Italy